The Effect of Power on Inductively Coupled Plasma Parameters
Article Sidebar
Main Article Content
Abstract
In this work, we studied the effect of power variation on inductively coupled plasma parameters using numerical simulation. Different values were used for input power (750 W-1500 W), gas temperature 300K, gas pressure (0.02torr), 5 tourns of the copper coil and the plasma was produced at radio frequency (RF) 13.56 MHZ on the coil above the quartz chamber. For the previous purpose, a computer simulation in two dimensions axisymmetric, based on finite element method, was implemented for argon plasma. Based on the results we were able to obtain plasma with a higher density, which was represented by obtaining the plasma parameters (electron density, electric potential, total power, number density of argon ions, electron temperature, number density of excited argon atoms) where the high density in the generated plasma provides a greater degree in material processing, which increases the efficiency of the system. These results may aid in future research towards the development of more efficient optimization of plasma parameters which are (electron density, electric potential, total power, number density of argon ions, electron temperature, and number density of excited argon atoms).
Article Details
Issue
Section
This work is licensed under a Creative Commons Attribution 4.0 International License.
© 2023 The Author(s). Published by College of Science, University of Baghdad. This is an open-access article distributed under the terms of the Creative Commons Attribution 4.0 International License.
How to Cite
References
Cho D.G., Han J., Han D., and Moon S.Y., Absolute density measurement of hydrogen atom in inductively coupled Ar/H2 plasmas using vacuum ultraviolet absorption spectroscopy. Current Applied Physics, 2020. 20(4): pp. 550-556.
Giersz J., Jankowski K., Ramsza A., and Reszke E., Microwave-driven inductively coupled plasmas for analytical spectroscopy. Spectrochimica Acta Part B: Atomic Spectroscopy, 2018. 147: pp. 51-58.
Cai M., Haydar D.A., Montaser A., and Mostaghimi J., Computer simulation of argon-nitrogen and argon-oxygen inductively coupled plasmas. Spectrochimica Acta Part B: Atomic Spectroscopy, 1997. 52(3): pp. 369-386.
Deng J., Zhang J., Zhang Q., and Xu S., Effects of induction coil parameters of plasma torch on the distribution of temperature and flow fields. Alexandria Engineering Journal, 2021. 60(1): pp. 501-510.
Yin S., Estimation of rotor position in brushless direct current motor by memory attenuated extended Kalman filter. European Journal of Electrical Engineering, 2019. 21(1): pp. 35-42.
Gao Y. and Lu H., A novel Co-planar waveguide-fed direct current wide band printed dipole antenna. Traitement du Signal, 2019. 36(3): pp. 253-257.
Qin X., Yang G., Cai F., Jiang B., Chen H., Tan C., Kandasamy S.K., Kandasamy K., Sulaiman M., and Su N.C., Recovery and reuse of spent LiFePO4 batteries. J. New Mater. Electrochem. Syst, 2019. 22(3): pp. 119-124.
Meichsner J. and Wegner T., Evaluation of oxygen species during e–h transition in inductively coupled RF plasmas: combination of experimental results with global model. The European Physical Journal D, 2018. 72(5): pp. 1-15.
Brezmes A.O. and Breitkopf C., Fast and reliable simulations of Argon inductively coupled plasma using COMSOL. Vacuum, 2015. 116: pp. 65-72.
Bukowski J., Graves D., and Vitello P., Two‐dimensional fluid model of an inductively coupled plasma with comparison to experimental spatial profiles. Journal of Applied Physics, 1996. 80(5): pp. 2614-2623.
Miller P.A., Hebner G.A., Greenberg K.E., Pochan P.D., and Aragon B.P., An inductively coupled plasma source for the Gaseous electronics conference RF reference cell. Journal of Research of the National Institute of Standards Technology, 1995. 100(4): pp. 427-439.
Olthoff J.K. and Greenberg K., The Gaseous electronics conference RF reference cell—An introduction. Journal of Research of the National Institute of Standards Technology, 1995. 100(4): pp. 327-339.
Lymberopoulos D.P. and Economou D., Two-dimensional self-consistent radio frequency plasma simulations relevant to the Gaseous electronics conference RF reference cell. Journal of Research of the National Institute of Standards Technology, 1995. 100(4): pp. 473-494.
Javadpour S., Simulation of magnetically confined inductively coupled plasma, M.Sc. Thesis, South Dakota State University, 2017.
Bozkurt E., Güngör Ü.E., and Alemdaroğlu N., Validation and benchmarking of COMSOL 2D axisymmetric inductively coupled argon plazma model, 9, Ankara Uluslararası Havacılık ve Uzay Konferansı, AIAC. 2017. pp. 1-12.
Bogaerts A. and Gijbels R., Modeling of metastable Argon atoms in a direct-current glow discharge. Physical Review A, 1995. 52(5): pp. 3743-3751.
Shirafuji T., Nakamura A., and Tochikubo F., Numerical simulation of electric double layer in contact with dielectric barrier discharge: Effects of ion transport parameters in liquid. Japanese Journal of Applied Physics, 2014. 53(3S2): pp. 03DG04(1-15).