Effect of Deposit Au thin Layer Between Layers of Perovskite Solar Cell on Cell's Performance
Article Sidebar
Main Article Content
Abstract
The present work aims to fabricate n-i-p forward perovskite solar cell (PSC) withئ structure (FTO/ compact TiO2/ compact TiO2/ MAPbI3 Perovskite/ hole transport layer/ Au). P3HT, CuI and Spiro-OMeTAD were used as hole transport layers. A nano film of 25 nm gold layer was deposited once between the electron transport layer and the perovskite layer, then between the hole transport layer and the perovskite layer. The performance of the forward-perovskite solar cell was studied. Also, the role of each electron transport layer and the hole transport layer in the perovskite solar cell was presented. The structural, morphological and electrical properties were studied with X-ray diffractometer, field emission scanning electron microscope and current-voltage (J-V) characteristic curves, respectively. J-V curves revealed that the deposition of the Au layer between the electron transport layer (ETL) and Perovskite layer (PSK) reduced the power conversion efficiency (PCE) from 3% to 0.08% when one layer of C. TiO2 is deposited in the PSC and to 0.11% with two layers of C. TiO2. Power conversion efficiency, with CuI as the hole transport layer (HTL), showed an increase from 0.5% to 2.7% when Au layer was deposited between PSK and CuI layers. Also, Isc increased from 6.8 mA to 17.4 mA and Voc from 0.3 V to 0.5V. With depositing Au layer between P3HT and PSK layers, the results showed an increase in the efficiency from 1% to 2.6% and an increase in Isc from 10.7 mA to 30.5 mA, while Voc decreased from 0.75 V to 0.5V
Article Details
Issue
Section
This work is licensed under a Creative Commons Attribution 4.0 International License.
© 2023 The Author(s). Published by College of Science, University of Baghdad. This is an open-access article distributed under the terms of the Creative Commons Attribution 4.0 International License.
How to Cite
References
Yu Z. and Sun L., Recent progress on hole‐transporting materials for emerging organometal halide perovskite solar cells. Advanced Energy Materials, 2015. 5(12): pp. 1500213.
Yusoff A.R.b.M. and Nazeeruddin M.K., Organohalide lead perovskites for photovoltaic applications. The journal of physical chemistry letters, 2016. 7(5): pp. 851-866.
Chaudhary D.K., Kumar P., and Kumar L., Realization of efficient perovskite solar cells with MEH: PPV hole transport layer. Journal of Materials Science: Materials in Electronics, 2017. 28(4): pp. 3451-3457.
Kodeary A., Hamidi S., and Moradlou R., Voltage controlled properties of piezo-magneto-plasmonic core/shell nanoparticles. Nano-Structures and Nano-Objects, 2020. 21: pp. 100415.
Saliba M., Matsui T., Seo J.-Y., Domanski K., Correa-Baena J.-P., Nazeeruddin M.K., Zakeeruddin S.M., Tress W., Abate A., and Hagfeldt A., Cesium-containing triple cation perovskite solar cells: improved stability, reproducibility and high efficiency. Energy environmental science, 2016. 9(6): pp. 1989-1997.
Wang Q., Phung N., Di Girolamo D., Vivo P., and Abate A., Enhancement in lifespan of halide perovskite solar cells. Energy Environmental Science, 2019. 12(3): pp. 865-886.
Jeong J., Kim M., Seo J., Lu H., Ahlawat P., Mishra A., Yang Y., Hope M.A., Eickemeyer F.T., Kim M., et al., Pseudo-halide anion engineering for α-FAPbI 3 perovskite solar cells. Nature, 2021. 592(7854): pp. 381-385.
Ng A., Ren Z., Shen Q., Cheung S.H., Gokkaya H.C., So S.K., Djurišić A.B., Wan Y., Wu X., and Surya C., Crystal engineering for low defect density and high efficiency hybrid chemical vapor deposition grown perovskite solar cells. ACS applied materials interfaces, 2016. 48(8): pp. 32805-32814.
Roy P., Sinha N.K., Tiwari S., and Khare A., A review on perovskite solar cells: Evolution of architecture, fabrication techniques, commercialization issues and status. Solar Energy, 2020. 198: pp. 665-688.
You J., Meng L., Song T.-B., Guo T.-F., Yang Y.M., Chang W.-H., Hong Z., Chen H., Zhou H., and Chen Q., Improved air stability of perovskite solar cells via solution-processed metal oxide transport layers. Nature nanotechnology, 2016. 11(1): pp. 75-81.
Zhang P., Wu J., Zhang T., Wang Y., Liu D., Chen H., Ji L., Liu C., Ahmad W., and Chen Z.D., Perovskite solar cells with ZnO electron‐transporting materials. Advanced Materials, 2018. 30(3): pp. 1703737.
Faßl P., Exploration of Properties, Stability and Reproducibility of Perovskite Solar Cells, Ph. D. Thesis, RUPERTO-CAROLA UNIVERSITY OF HEIDELBERG, GERMANY, 2019.
Im J.-H., Lee C.-R., Lee J.-W., Park S.-W., and Park N.-G., 6.5% efficient perovskite quantum-dot-sensitized solar cell. Nanoscale, 2011. 3(10): pp. 4088-4093.
Assi A.A., Saleh W.R., and Mohajerani E. Effect of Metals (Au, Ag, and Ni) as Cathode Electrode on Perovskite Solar Cells. in IOP Conference Series: Earth and Environmental Science. 2021. IOP Publishing. No. 1, 012019, pp. 1-8.
Assi A.A., Saleh W.R., and Mohajerani E. Investigate of TiO2 and SnO2 as electron transport layer for perovskite solar cells. in AIP Conference Proceedings. 2020. AIP Publishing LLC. No. 1, 050039, pp. 1-9.
Jena A.K., Kulkarni A., and Miyasaka T., Halide perovskite photovoltaics: background, status, and future prospects. Chemical reviews, 2019. 119(5): pp. 3036-3103.
Oku T., Crystal structures of CH3NH3PbI3 and related perovskite compounds used for solar cells. Solar Cells-New Approaches Reviews, 2015. 1. ed.1, IntechOpen.