Evaluation of Mechanical Properties for Epoxy reinforced with palm oil /Zinc oxide composites
Article Sidebar
Main Article Content
Abstract
In this research, the effect of reinforcing epoxy resin composites with a filler derived from chopped agriculture waste from oil palm (OP). Epoxy/OP composites were formed by dispersing (1, 3, 5, and 10 wt%) OP filler using a high-speed mechanical stirrer utilizing a hand lay-up method. The effect of adding zinc oxide (ZnO) nanoparticles, with an average size of 10-30 nm, with different wt% (1,2,3, and 5wt%) to the epoxy/oil palm composite, on the behavior of an epoxy/oil palm composite was studied with different ratios (1,2,3, and 5wt%) and an average size of 10-30 nm. Fourier Transform Infrared (FTIR) spectrometry and mechanical properties (tensile, impact, hardness, and wear rate) were used to examine the composites. The FTIR results show a strong interaction between ZnO and oil palm fiber and epoxy resin. Tensile strength was reduced from 22.78 MPa to 19.03 MPa for the epoxy/OP composite as the wt% of OP was increased but increased to 29.224MPa for epoxy /oil palm / 5% ZnO samples. Young modulus increased from 1.9 MPa to 4.3 MPa while elongation decreased (9.6 to 6.8 %) with the increase of wt% OP and ZnO. The impact and hardness increased for all composites between (6.94 - 10.8 KJ/m2) and between (80.8- 84.55 KJ/m2) respectively. Also, wear resistance of the epoxy/OP and epoxy/OP/ZnO samples increased with the increase of wt% OP and ZnO. This studied in order to provide a new step in the utilization of green nanoparticle fillers for sustainable and renewable structural products for biodegradability.
Article Details
This work is licensed under a Creative Commons Attribution 4.0 International License.
Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution (CC-BY) 4.0 License that allows others to share the work with an acknowledgement of the work’s authorship and initial publication in this journal.
How to Cite
References
Ibrahim N.I., Shahar F.S., Sultan M.T.H., Shah A.U.M., Safri S.N.A., and Mat Yazik M.H., Overview of Bioplastic Introduction and Its Applications in Product Packaging. Coatings, 2021. 11(11): pp. 1-23.
Mangaraj S., Yadav A., Bal L.M., Dash S., and Mahanti N.K., Application of biodegradable polymers in food packaging industry: a comprehensive review. Journal of Packaging Technology Research, 2019. 3(1): pp. 77-96.
Valerio O., Muthuraj R., and Codou A., Strategies for polymer to polymer recycling from waste: Current trends and opportunities for improving the circular economy of polymers in South America. Current Opinion in Green Sustainable Chemistry, 2020. 25: pp. 1-21.
RameshKumar S., Shaiju P., and O'Connor K.E., Bio-based and biodegradable polymers-State-of-the-art, challenges and emerging trends. Current Opinion in Green Sustainable Chemistry, 2020. 21: pp. 75-81.
Delgado-Aguilar M., Julián F., Tarrés Q., Méndez J., Mutjé P., and Espinach F., Bio composite from bleached pine fibers reinforced polylactic acid as a replacement of glass fiber reinforced polypropylene, macro and micro-mechanics of the Young's modulus. Composites Part B: Engineering, 2017. 125: pp. 203-210.
Reichert C.L., Bugnicourt E., Coltelli M.-B., Cinelli P., Lazzeri A., Canesi I., Braca F., Martínez B.M., Alonso R., and Agostinis L., Bio-based packaging: Materials, modifications, industrial applications and sustainability. Polymers, 2020. 12(7): pp. 1-35.
Iriani E., Permana A., Yuliani S., Kailaku S., and Sulaiman A. The effect of agricultural waste nanocellulose on the properties of bioplastic for fresh fruit packaging. in IOP Conference Series: Earth and Environmental Science. 2019. IOP Publishing.
Velayutham T., Abd Majid W.H., Gan W., Khorsand Zak A., and Gan S., Theoretical and experimental approach on dielectric properties of ZnO nanoparticles and polyurethane/ZnO nanocomposites. Journal of Applied Physics, 2012. 112(5): pp. 1-10.
Saba N., Tahir P.M., Abdan K., and Ibrahim N.A., Fabrication of epoxy nanocomposites from oil palm nano filler: mechanical and morphological properties. BioResources, 2016. 11(3): pp. 7721-7736.
Ghazilan A.A., Mokhtar H., Dawood M.S., Aminanda Y., and Ali J.M. Tensile Mechanical Property of Oil Palm Empty Fruit Bunch Fiber Reinforced Epoxy Composites. in IOP Conference Series: Materials Science and Engineering. 2017. IOP Publishing.
Faizi M.K., Bakar S.A., Majid M., and Mohd S.B., Tensile characterizations of oil palm empty fruit bunch (OPEFB) fibres reinforced composites in various epoxy/fibre fractions. Biointerface Res. Appl. Chem, 2021. 12: pp. 6148-6163.
ASTM D-633, ASTM International, Standard test method for tensile properties of plastics. Astm International. 2014.
SO 179-2:2020 Plastics—Determination of Charpy impact properties — Part 2: Instrumented impact test. 2014.
ASTM G99-05 “Standard Test Method for Wear Testing with a Pin-on-Disk Apparatus. 2010.