Variation of pH and Composite Dosage on the Photocatalytic Activity for ZnO/epoxy Nanocomposites
Article Sidebar
Main Article Content
Abstract
In this research, Zinc oxide (ZnO)/epoxy nanocomposite was synthesized by simple casting method with 2wt. % ZnO concentration. The aim of this work was to study the effect of pH and composite dosage on the photocatalytic activity of ZnO/ epoxy nanocomposite. Scanning electron microscopy (SEM) technique images proof the homogeneous distribution of ZnO nanoparticles in epoxy. A synthesized nanocomposite samples were characterized by Fourier Transform Infrared spectrometer (FTIR) measurements. Two spectra for epoxy and 2wt.% ZnO/epoxy nanocomposites were similar and there are no new bonds formed from the incorporation of ZnO nanoparticles. Using HCl and NaOH were added to Methylene blue (MB) dye (5ppm) to gat pH values 3 and 8. The degradation of the dye was 90.816% were pH =8 after 180 min. under sun-light. The degradation was 6.131% were pH=3 after 240 min. under sun-light irradiation. It is found that the base solution help in accelerating the photocatalytic process, pH with high value provides greater concentration of hydroxyl ions which interact with h+ to form hydroxyl radicals OH- that give an enhancement degradation rate of dyes. The dose of ZnO was increased from 3g to 6g with Methylene blue MB (5ppm) the degradation was 94.3755% after 240 min. under sun-light irradiation. This means that increasing the dose of ZnO, the photocatalytic activity will be increased.
Article Details
This work is licensed under a Creative Commons Attribution 4.0 International License.
Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution (CC-BY) 4.0 License that allows others to share the work with an acknowledgement of the work’s authorship and initial publication in this journal.
How to Cite
References
Ohtani B., Preparing articles on photocatalysis—beyond the illusions, misconceptions, and speculation. J Chemistry letters, 2008. 37(3): pp. 216-229.
Sanad M.F., Shalan A.E., Bazid S.M., and Abdelbasir S.M., Pollutant degradation of different organic dyes using the photocatalytic activity of ZnO@ ZnS nanocomposite materials. Journal of environmental chemical engineering, 2018. 6(4): pp. 3981-3990.
Rahman Q.I., Ahmad M., Misra S.K., and Lohani M., Effective photocatalytic degradation of rhodamine B dye by ZnO nanoparticles. Materials Letters, 2013. 91: pp. 170-174.
Ong C.B., Ng L.Y., and Mohammad A.W., A review of ZnO nanoparticles as solar photocatalysts: Synthesis, mechanisms and applications. Renewable Sustainable Energy Reviews, 2018. 81: pp. 536-551.
Sharif M., Heidari A., and Aghaeinejad A., Effect of ZnO-GO Particles on the Photopolymerization and Photo-Cleaning of Epoxy Coating. Journal of Photopolymer Science Technology, 2019. 32(1): pp. 27-31.
Eyasu A., Yadav O.P., and Bachheti R., Photocatalytic degradation of methyl orange dye using Cr-doped ZnS nanoparticles under visible radiation. Int. J. Chem. Tech. Res, 2013. 5(4): pp. 1452-1461.
Al-Shabander B.M., Preparation of TiO2 nanorods by Sol–Gel template method and measured its photo-catalytic activity for degradation of methyl orange. Iraqi Journal of Physics, 2015. 13(26): pp. 171-177.
Li X., Hou Y., Zhao Q., and Wang L., A general, one-step and template-free synthesis of sphere-like zinc ferrite nanostructures with enhanced photocatalytic activity for dye degradation. Journal of colloid interface science, 2011. 358(1): pp. 102-108.
Kazeminezhad I. and Sadollahkhani A., Influence of pH on the photocatalytic activity of ZnO nanoparticles. Journal of Materials Science: Materials in Electronics, 2016. 27(5): pp. 4206-4215.
Chuan X.-Y., Hirano M., and Inagaki M., Preparation and photocatalytic performance of anatase-mounted natural porous silica, pumice, by hydrolysis under hydrothermal conditions. Applied Catalysis B: Environmental, 2004. 51(4): pp. 255-260.
Machado L.C., Torchia C.B., and Lago R.M., Floating photocatalysts based on TiO2 supported on high surface area exfoliated vermiculite for water decontamination. Catalysis Communications, 2006. 7(8): pp. 538-541.